#!/bin/bash
BSITEARG=$(echo $1 | tr '[a-z]' '[A-Z]')
bsitearg=$(echo $1 | tr '[A-Z]' '[a-z]')
echo "Running $0" 1>>rasp.${bsitearg}.printout
echo "Running $0 output to rasp.$bsitearg.printout"
cd /home/tj/drjack/RASP/UTIL
rm /home/tj/drjack/RASP/UTIL/blipspots/*.html
doregions="notassigned"
workdone=0;
if [ -z $1 ]
then
doregions="all";
else
doregions=$1;
fi
echo $doregions
if [[ $doregions == "PNW" && $(date +%k) -gt 16 && $(date +%k) -lt 21 ]]
then
echo "doing getblipspnw"
getblipspnw
exit
fi
if [[ $doregions == "Blanchard" && $(date +%k) -gt 16 && $(date +%k) -lt 22 ]]
then
getblipsblanchardearly
exit
fi
#Start with an empty directory by archiving.
#datetag=$(date +%Y%m%d%H)
#mmv "/home/tj/drjack/RASP/UTIL/blipspots*" "/nt2/wx/blipspots/$datetag#1"
#rm ./blipspots/*.html
echo "doregions = $doregions"
#exit
# run the extract blipspot program on predefined coordinates for different regions
# run this after the region in question has run
#
# variable inputs to this script region
# this script will handle the inputs hard wired to the
# /home/tj/drjack/RASP/UTIL/extract.blipspot.PL PNW PNW d2 1 script
# that script requires that extract.blipspot.site.parameters be set to desired values
#
# \$1=region site \$2=grid# \$3=day(-1/0/1/2)|yyyymmdd(archive) \$4,5=i,j(integer)_or_lat,lon(decimal) \$6=LINFO <\$*=time/param>\n;
#
# |sed -e 's#- ##g' -e 's# #
#g' -e 's#^#
#' -e 's#
$#
#'
# The above, when used with a 0 at the end of the command, gets an html table of the data without any elaboration.
# need to join it to labels for each row and column if used. The following creates a table with numbered lines
# ./extract.blipspot.PL PNW PNW d2 0 48.22 -122.76 0 |sed -e '/^/=' -e 's#- ##g' -e 's# #
#g' -e 's#^#
#' -e 's#
$##g'|sed -e
# using 0 option this gets a numbered file
#./extract.blipspot.PL PNW PNW d2 0 48.22 -122.76 0 |sed -e '/^/=' -e 's#- ##g' -e 's# #
#g' -e 's#^#
#' -e 's#
$##g'|sed -e 's#\(^[0-9][0-9]*\)#@\1#' |tr "\n" " " |tr "@" "\n" > outtemp
#then join it with a column of names and strip leading line numbers
#join blipparams outtemp |sed -e 's#^[0-9]* ##' >blipspot.tmp
# the following line was working
# ./extract.blipspot.PL PNW PNW d2 0 48.22 -122.76 0 |sed -e '/^/=' -e 's#- ##g' -e 's# #
#g' -e 's#^#
#' -e 's#
$##g'|sed -e 's#\(^[0-9][0-9]*\)#@\1#' |tr "\n" " " |tr "@" "\n"
#echo "Blipspot for all Pacific NWet RASP sites
#g'|sed -e 's#\(^[0-9][0-9]*\)#@\1#' |tr "\n" " " |tr "@" "\n" > outtemp
#echo "this is a cat of outtemp"
#cat outtemp
#then join it with a column of names and strip leading line numbers
#join blipparams outtemp |sed -e 's#^[0-9]* ##' >blipspot.tmp
echo "Blipspot for $site at $lat $lon " >$outfile
echo "" >>$outfile
# echo "
TEMPERATURE# colspan=5>Thermal Trigger time & Surface (2m) Temperature that Time to get that Depth of Lift#' >outtemp2
#collect the header lines to show what has been done.
cat header >>/home/tj/drjack/RASP/RUN/done_blips
#cat outtemp2 >>./blipspots/allblips.html
cat outtemp2 >>$outfile
#echo " " >>$outfile
if [[ $region == "EBEY" ]]
then
echo "
" >>$outfile
fi
echo "* The Boundary Layer is also known as the Mixing layer and its top is also called the mixing height. It is the top of thermally induced lift and the level at which the Thermal Index goes to zero. " >>$outfile
echo "" >>$outfile
echo "" >>$outfile
#echo "
" >>./blipspots/allblips.html
#grep sed -e 's#\(^.* \)\([0-9][0-9]\)\([0-9][0-9]\)\( [0-9][0-9]\)\([0-9][0-9]\)\(.[0-9][0-9]\)\( [0-9][0-9]\)\([0-9][0-9]\)\(.[0-9][0-9]\)\(.*$\)#\
\1
\°
rm outtemp
rm outtemp2
else
echo "No data file for $region/FCST/sfcwinddir.curr.1800lst.*.data at $(date +%Y_%m_%d_%H:%M)"
exit
fi
(( i += 1 )) ;
done
#exit
#cho "" >>./blipspots/allblips.html
#echo $outfile" is outfile"
#echo $workdone" is workdone"
#if [[ $workdone > 0 ]]
#then echo "$workdone is greater than 0"
#fi |sed -e 's#\(BLIPSPOT for \)\([0-9]*\)#\1\2<\big><\b>#g'
if [[ $workdone -gt 0 ]]
then
cd /home/tj/drjack/RASP/UTIL/blipspots
bfiles="{"
efiles="}"
files=$bfiles$(ls ./* | sed -e 's#^.*\/##' |tr -s "'\n" "," )$efiles
/home/tj/bin/uploadw "$files"
else
echo "nothing to do"
exit
fi
mmv -a "blipspot*.html" "$(date +%Y_%m_%d_%H)blipspots.html"
zip -m /nt2/wx/archive/blipspots.zip "$(date +%Y_%m_%d_%H)blipspots.html"
exit
sed -e 's#^.*\/##' |tr -s "'\n" "," )$efiles
/home/tj/bin/uploadw "$files"
getquickblips
else
echo "nothing to do"
exit
fi
/usr/bin/mmv -a "blipspot*.html" "$(date +%Y_%m_%d_%H)blipspots.html"
/usr/bin/zip -m /nt2/wx/archive/blipspots.zip "$(date +%Y_%m_%d_%H)blipspots.html"
touch /home/tj/drjack/RASP/RUN/done_blipspots_$region
exit